Main performance of FC-T40 high speed annealing tinning machine
- The annealer integral type, total thickness is 500mm, and 100mm
much thicker than general supplier’s design. The heat preservation
effect is good. This type can save 30% of electricity.
- The annealer, oven and tinning furnace is tube type. Easy to
replace and maintenance.
- The two ends of the furnace tube all ceramic sleeve design, to
prevent the wire be scratched.
- The water tank is re-cycle design and with water tank and pump.
- The two ends of the hauling drum with revolving joints and can
connect the re-cycle water for cooling.
- The take up is 44 heads single layer design. Another four heads is
- Is fit for human’s height. Can be operated easily.
- The take up two ends is with clapboard design, to prevent broken
wire effect the connecting wires.
- Below the annealing furnace and upper of the take up has lights
design, easy for workers to operate the wire.
|Components for annealing tin unit as follows:|
|1.Pay-off rack(40heads pay off)||1 set|
|(1)Bobbin:φ300*φ127*270||Pay off cap is customer prepare|
|(2) vertical brush pay off|
|2. Annealing furnace ( tube annealing)||1 set|
|(1)6m,zone 3 temperature control||Body6000*1250*500mm|
|(2)304stainless steel annealer tube||40sets||Tube:φ14*φ10*7000|
|(3)annealing wire: φ0.15-φ0.68mm|
|(4)annealing power:40.5KW||304stainless steel heating tube:750W*54pcs|
|(1)SUS304stainless steel water tank||1set|
|(2)water tank+JP125 pump||1set|
|(1)High pressure fan||1set|
|5. Oven part(heating tube heat)||1set|
|(2)304stainless heating tube:1000W*6pcs|
On terms of payment: FOB Shanghai
Delivery date: 30% T/T advance,70% before shipment
Country of origin: China
Mininum order: 1 set
Package: comfortable for container